TW Series (Dust & Gas Respirator)

TW02S

※ Combine with filters or absorption canisters matching your working application. (Before use, confirm that the respirator’s assigned protection factor exceeds the required protection factor of the workplace.)

Applicable Work Operations

1. Manufacturing and handling of chemical substances

2. Welding, thermal cutting and metal melting operations

3. When used in indoor workplaces with continuous metal arc welding: only applicable where the required protection factor is less than 10

4. Asbestos handling work (Class 3 respiratory protective equipment)

5. Dioxin hazard control (Level 2)

6. Pesticide spraying (emulsions, wettable powders, dust formulations)

7. Operations involving heavy metal-laden dust

8. Spray painting operations

9. Powder coating operations

10. Roller coating operations

11. Contaminated soil remediation work

12. Volcanic gas protection

13. Nanomaterial production and handling (scenarios with expected negligible exposure)

14. Indium compound protection (concentration below 3 μg/m³)

※ Operations requiring an assigned protection factor of 10 or higher

1. Decontamination work (when the risk of internal radiation exposure is high)

2. Radioactive dust handling work

3. Debris disposal during demolition and renovation of buildings and structures

Features

The TW single facepiece has passed national certification for both replaceable dust respirators and compact direct-connected gas respirators. Either filters or absorption canisters can be installed according to different working environments.

Compact design.The facepiece minimizes forward protrusion for excellent workability. It delivers a wide field of vision and can be worn together with welding shields and safety goggles.

Two dust filters last approximately four times longer than a single filter. (Comparison using the same T2 filter model)No metal components are adopted.