Dust & Gas Respirator
TW01SC
※ Use with filters or absorption canisters suitable for your work application. Before use, verify that the respirator’s assigned protection factor exceeds the required protection factor of the workplace.
Manufacturing and handling of chemical substances
Welding, thermal cutting and metal melting work
For indoor sites with continuous metal arc welding: only usable when the required protection factor is less than 10
Asbestos handling work (Class 3 respiratory protective equipment)
Dioxin hazard control (Level 1)
Pesticide spraying (emulsions, wettable powders, dust formulations)
Work with heavy metal-containing dust
Spray painting operations
Powder coating operations
Roller coating operations
Sander grinding work
Grinder machining work
Tar and oil mist protection
Water mist environments (wet grinding and similar tasks)
Sand, soil and rock dust (excavation, crushing work etc.)
Volcanic gas protection
Decontamination work (when high risk of internal radiation exposure exists)
Debris disposal during demolition and renovation of buildings and structures
The TW single facepiece has passed national certification for both replaceable dust respirators and compact direct-connected gas respirators. Either filters or absorption canisters can be mounted according to different working environments.
7 color variations available: White porcelain, Madder mica, Lapis navy mica, Carnation pink, Canary yellow, Mandarin orange, Crow black.Integrated fit checker: Simple seal test to check facial tightness.Wide field of vision design: Exhaust valves are installed on the upper section to secure unobstructed downward vision.Lightweight and compact.3 sizes (S, M, L) to fit different face shapes.No metal components adopted.Skin-friendly silicone rubber for face contact surface. TW01C made of thermoplastic elastomer is also available.